Climbing gear checklist
Date
Name
Crew
Gear set or ID number
Location
Belt, straps and lanyards
PassFailN/A- Webbing and leather show no cuts, fraying, burns or hard spots
- Stitching is intact and not pulled or worn
- Strap or lanyard has no chemical damage or paint on the fibers
- Rings and D-rings are not bent, cracked or sharp-edged
- Tags and markings are present and readable
Hooks, snaps and hardware
PassFailN/A- Hooks and snaps open and close freely, and lock
- Gate springs close the gate fully
- No cracks, rust, pitting, distortion or deep nicks
- Buckles and keepers hold and are not worn
Pole climbing hardware
PassFailN/A- Gaffs are the right shape and not worn, bent or cracked, per the maker's instructions
- Gaff guards are on during transport
- Climber pads and straps are secure
- Fasteners are tight
Harness and fall arrest
PassFailN/A- Harness webbing, stitching and hardware show no damage
- Shock absorber pack is intact and has not been deployed
- Connectors and anchorage devices are as the maker specifies
- Gear is current on your program's inspection schedule
Defects found and action taken
Taken out of service? Yes NoReported to
Inspector signature
Date
Supervisor review
Date
A starting point. Adapt it to your equipment, your procedures and the rules that apply to you.Free template from portalbaseai.com